2. Differential and Integral Calculus
2.1 Derivative of Real Functions
For a real function
if the finite limit exists. Equivalently,
The quotient is the slope of the secant line through
Differentiability implies continuity. If
so
The tangent line at
The linear approximation form is
meaning that the error is negligible compared with
Basic differentiation rules:
| Rule | Formula |
|---|---|
| Constant multiple | |
| Sum / difference | |
| Product | |
| Reciprocal | |
| Quotient | |
| Chain rule | |
| Inverse function | If |
Common elementary derivatives:
| Function | Derivative |
|---|---|
What to Emphasize in an Oral Answer
- Define the derivative as the limit of the difference quotient and interpret it as the limiting slope of secants or the tangent slope.
- State the tangent-line formula
and the local linear approximation . - Emphasize differentiability implies continuity, but continuity does not imply differentiability; use
at as the standard contrast. - Mention the main computation rules: linearity, product, quotient with nonzero denominator, chain rule, and inverse-function rule with nonzero derivative.
- Recall common elementary derivatives when relevant: powers, exponentials, logarithm, and trigonometric functions.
Suggested answer
The derivative of a real function at a point is the limit of the difference quotient. It measures the limiting slope of secant lines, and geometrically it is the slope of the tangent line at the point. If the limit exists, the tangent line has equation
Differentiability is stronger than continuity. From the identity
The derivative also gives the best local linear approximation:
Finally, derivatives are computed using rules. Linear combinations differentiate linearly, products and quotients use the product and quotient rules, composite functions use the chain rule, and inverse functions differentiate by the reciprocal of the original derivative at the corresponding point, provided that derivative is nonzero.
2.2 Applications of Differential Calculus to Function Analysis
Function analysis uses local and absolute extrema, first-order necessary conditions, derivative sign changes, monotonicity, convexity/concavity, inflection, and higher derivatives.
An extremum can be local or absolute:
| Type | Definition |
|---|---|
| Local maximum at | |
| Local minimum at | |
| Absolute maximum at | |
| Absolute minimum at |
If
This is necessary, not sufficient. A stationary point may fail to be an extremum, as
Sufficient tests:
| Test | Conclusion |
|---|---|
| local maximum | |
| local minimum | |
| strict local maximum | |
| strict local minimum | |
| inconclusive |
The mean value theorems support many function-analysis arguments:
| Theorem | Statement |
|---|---|
| Rolle | If |
| Lagrange mean value theorem | If |
| Cauchy mean value theorem | Applies the same idea to two functions and compares their increments through derivatives. |
Monotonicity is characterized by the derivative on intervals:
| Derivative condition on interval | Function behavior |
|---|---|
Convexity and concavity:
means
| Derivative behavior | Shape |
|---|---|
| convex criterion | |
| concave criterion |
An inflection point is a point where the graph changes convexity. Through the tangent definition, at
What to Emphasize in an Oral Answer
- Frame the topic as using derivatives to analyze extrema, monotonicity, convexity/concavity, and inflection.
- Define local versus absolute extrema and state Fermat's necessary condition: an interior differentiable local extremum has
. - Stress that
is not sufficient; apply first-derivative sign changes or the second-derivative test to classify candidates. - Mention Rolle's and Lagrange's mean value theorems as the basis for monotonicity results.
- State derivative criteria for monotonicity:
increasing, decreasing, constant on intervals. - Define convexity/concavity via chords and give the derivative tests: increasing/decreasing
or signs of . - Explain inflection as a change of convexity, often seen as the graph crossing its tangent.
Suggested answer
Differential calculus is used in function analysis because the derivative describes local change. For extrema, distinguish local extrema, which compare values only in a neighborhood, from absolute extrema, which compare values on the whole domain. The first important result is the necessary condition: if a differentiable function has a local extremum at an interior point, then its derivative there must be zero. This condition only gives candidates. To decide the type, we use sufficient conditions: if the derivative changes from positive to negative, there is a local maximum; if it changes from negative to positive, there is a local minimum. If the second derivative exists and
The derivative also controls monotonicity. On an interval, nonnegative derivative means increasing, nonpositive derivative means decreasing, and a derivative that is identically zero means the function is constant. These statements are based on the mean value theorem.
For shape, convexity means the graph lies below its chords, and concavity means it lies above them. If the derivative is increasing, the function is convex; if the derivative is decreasing, the function is concave. When the second derivative exists, this is often checked by the sign of
2.3 Differential Calculus of Functions of Several Variables
For
Equivalently,
The derivative is this unique linear map
For a real-valued function
In coordinates, partial derivatives are slopes along coordinate-parallel lines on the graph.
The topic also asks for directional derivatives. For a direction vector
if the limit exists. If
For scalar-valued
Partial derivatives alone do not always imply total differentiability. A common sufficient condition is: if the partial derivatives exist in a neighborhood of
The Jacobian matrix is the matrix of the total derivative. For
For scalar-valued
The gradient points in the direction of steepest increase, and its dot product with a unit vector gives the directional derivative in that direction.
For a surface
provided
What to Emphasize in an Oral Answer
- Define total differentiability as a linear map plus an error that is
; this is the real multivariable derivative. - Explain partial derivatives as one-coordinate slopes and note that their existence alone does not guarantee total differentiability.
- State the common sufficient criterion: partial derivatives exist near the point and are continuous at the point.
- Define directional derivatives and, under total differentiability, use
. - Describe the Jacobian matrix for vector-valued functions and the gradient for scalar-valued functions.
- Mention the gradient's role:
gives directional derivatives and the gradient points toward steepest increase. - Give the tangent-plane formula for
as the concrete linear approximation.
Suggested answer
For functions of several variables, the correct analogue of the derivative is the total derivative. A function
Partial derivatives are obtained by varying one coordinate at a time. They measure coordinate-direction slopes, but by themselves they do not always guarantee full differentiability. A standard sufficient condition is that the partial derivatives exist near the point and are continuous at the point. Directional derivatives generalize partial derivatives by varying in an arbitrary direction
For scalar-valued functions, the Jacobian is identified with the gradient vector. The gradient contains the partial derivatives, points in the direction of steepest increase, and satisfies
2.4 The Definite Integral
The Riemann integral can be defined through lower and upper Darboux sums. Let
be a partition. On each subinterval define
The lower and upper sums are
The lower Darboux integral is the supremum of lower sums, and the upper Darboux integral is the infimum of upper sums. The function is Riemann integrable if these two values are equal; their common value is
Continuous functions on
Integrability is stable under common operations. If
| Operation | Result |
|---|---|
| integrable | |
| integrable | |
| integrable | |
| integrable, and $| \int f| \le \int | f | $ | |
| integrable if |
Important properties:
| Property | Formula |
|---|---|
| Linearity | |
| Monotonicity | If |
| Interval additivity | If |
| Reversal | |
| Zero interval |
The integral function generated by an integrable function is
If
This is one form of the fundamental theorem of calculus.
The Newton-Leibniz formula in State: if
What to Emphasize in an Oral Answer
- Define the Riemann integral through Darboux lower and upper sums; integrability means their supremum and infimum coincide.
- Mention key integrable classes: continuous functions and bounded piecewise continuous functions with finitely many discontinuities/pieces.
- State the main algebraic and order properties: linearity, monotonicity, interval additivity, reversal of bounds, and absolute-value inequality.
- Explain the integral function
: it is continuous for integrable and differentiable at points where is continuous. - State Newton-Leibniz: if
under the usual hypotheses, then .
Suggested answer
The definite integral can be defined by Darboux sums. For a bounded function on
Continuous functions are Riemann integrable, and bounded piecewise continuous functions with finitely many pieces are also integrable. Integrability is preserved by sums, scalar multiples, products, absolute values, and quotients when the denominator stays away from zero. The integral is linear, monotone, additive over adjacent intervals, changes sign when the bounds are reversed, and is zero over a degenerate interval.
The integral function
2.5 The Indefinite Integral
A primitive function is follows: on an open interval
On an interval, if
Continuity is a sufficient condition for the existence of a primitive locally through the integral function: if
is a primitive of
Linearity:
Integration by parts follows from the product rule. If
Equivalently, in the common notation:
For definite integrals:
Substitution rules:
| Rule | Formula | Idea |
|---|---|---|
| First substitution / chain-rule form | If | Recognize a derivative inside a composition. |
| Definite substitution | Change variables and transform bounds. | |
| Second substitution / inverse substitution | Set | Useful for roots, trigonometric substitutions, and rationalization. |
State both indefinite and definite substitution cases and both indefinite and definite integration-by-parts cases.
What to Emphasize in an Oral Answer
- Define a primitive
by and the indefinite integral as the family of all primitives. - State that on an interval any two primitives differ by a constant, giving the notation
. - Mention existence: continuity of
is sufficient via , but not necessary. - Include linearity of indefinite integration.
- State integration by parts as the inverse of the product rule, with both indefinite and definite versions.
- State substitution as the inverse of the chain rule, including transformed bounds for definite integrals and inverse substitution when appropriate.
Suggested answer
The indefinite integral is the inverse problem of differentiation. A primitive of
Continuity of
The main computation rules come from differentiation rules. Integration by parts is the inverse of the product rule:
Additional Material: Differential Equations
Differential equations are included here as related calculus material.
A differential equation is a problem of finding a differentiable function
If additionally
For first-order linear differential equations, use
If
The method of variation of constants looks for an inhomogeneous solution as
with solution
and half-life
For higher-order linear differential equations, use the form
With constant coefficients, the characteristic polynomial
determines homogeneous exponential solutions. Repeated roots add powers of
